Beauty Of Hardwood With The Laminate Flooring

Everyone loves the beautiful and timeless look of wooden floors. Elegant yet straightforward hardwood is impressive. But take a closer look. Is that wood scratched and dented? Are those fading spots and marks you see there? Maybe that hardwood floor isn’t as lovely as you initially thought.

If you like the timeless look and feel of hardwood floors, but don’t want the scratches, dents, and discoloration marks that will come with them, laminate flooring is a good option for you. 

What type of laminate flooring should I buy?

When choosing your laminate flooring from Laminate flooring Dealers, you will need to keep a few things in mind. The first thing to look at is where you are going to place the flooring. Alternatively, is the area you are covering a smaller, low-traffic area? If you’re looking to cover a low-traffic area, you can probably get away with a laminate floor that has a smaller core.

Colors and sizes

The core sizes of laminate flooring range from 6mm to 12mm. The thicker the core of the soil, the better the stability. Also, if you have a thicker body, it will resist wearing better and is likely to last longer than a thinner core.

You can also go for a lower quality laminate floor. Usually, when people buy a house, the bottom is the first thing that changes, so there is no point in spending a lot of money on an apartment when you move house.

Most laminate floors come with warranties that start around ten years. Generally, the more expensive types of flooring will come with more extended warranties. However, be sure to read your promises very carefully, as some contracts may not cover the location of the floor in the kitchen or bathroom.

Can I do it myself?

You can install most laminate siding over the vinyl sheet, concrete slab, plywood, existing hardwood, or any other flat, level surface.

Glueless Pergo flooring is a prevalent choice because it does not require glue to install correctly or any other special tools of any kind. Therefore, anyone can do it on their own without any special training. Even if you’ve never installed flooring before, or don’t have a lot of home renovation experience, laminate flooring installs easily.

The most significant benefit of installing the discount laminate flooring yourself is that you can save thousands of dollars in installation fees. Unlike hardwood floors that are already very expensive and must be professionally installed, laminate is quick and easy, even for beginners.

And in the kitchen?

Laminate flooring is the best choice for the kitchen and bathroom because it repels water. The core of the laminate flooring has been infused with a water repellent to protect it from the daily spills that occur. However, suppose you are considering installing your flooring in the kitchen or bathroom. In that case, you may want to purchase flooring that has been infused with paraffin wax at the joints to repel water further and prevent swelling.

Because we all know that spills happen. Water and food spills can stain traditional hardwood floors, and with laminate, wipe it up, and you’re all set.

Choose the right floor.

You will be able to find laminates in many price ranges, so there is something for everyone and all budgets. If your room is not entirely square or rectangular, divide your space into smaller areas that can be squared. Now take the size of your new place and divide it by the covered area as indicated on the packages of your chosen laminate flooring type. This will now give you a figure that is equal to the number of boxes you will need to purchase to cover your area.

Measuring for your laminate flooring

To purchase the correct amount of laminate flooring, you will need to find out the total square area you need to cover. Fortunately, laminate flooring comes in packages (which vary in the number of boards they contain depending on the type you purchase), indicating both the individual board size of the panels and the total area covered per package. Therefore, to calculate how many containers of laminate flooring you will need for your project, you will first need to multiply the width by the depth of your room. This will give you the size of your area squared.

Mark your floor

While it is necessary to mark where you will lay each laminate board as you would tile-laying, it is essential to determine how you will apply your first row and get it right. For this reason, before proceeding to the placement of the base, decide now where you will begin to place your first row of laminate and the direction that the boards will go. It is always advisable to start laying your flooring in the lightest part of the room. 

This test row will help determine how much of the final row board you will need to cut to make the flooring fit. This is useful for planning as you should avoid a situation where you have to cut more than 50% of the depth of the board (the short side) or less than 400mm of the width of the board (the long side ). 

Placing the base

Begin laying the underlayment by first making sure you have the spacers in place and that the rolls are positioned at a 90-degree angle to how you will be applying the laminate boards; this is to avoid that the joints between the subfloor pieces correspond to the joints between the laminate flooring piece. While laying the base coat, make sure there are no gaps or overlaps between the sections, as any of these could cause the laminate boards to sag or stand out. The goal here is a friendly, consistent surface. Glue the seams between the sections with some masking tape to hold them in place.

Read Also: Why Carpet is Important in Dubai

Laying laminate flooring

Now it’s about actually laying the laminate flooring. Following the layout you already solved in Step 3, begin laying your laminate flooring, remembering to keep the spacers in place between the laminate flooring and the baseboard to allow for expansion. If you are using tongue-and-groove laminate flooring, insert each new board at a 45-degree angle to the old one and gently lower the new board into place. 

You should feel the tongue click into the groove, and the boards should line up with each other. It is advisable to use a drawbar and bump block to help encourage each panel into place after it has been placed. Drawbars are used when you reach the end of a row and don’t have enough room to use a hit block.

Apply the finishing touches

If possible, leave the flooring freshly laid for 48 hours before adding the finishing touches, such as trim, plaid, or transition bars. This will give the floor more time to acclimate to the room, and this is where that 10mm gap we leave between the floor, and the skirting boards come into play, allowing the foot to expand without running out of space.